This message board has been upgraded to a new forum with a number of user improvements.
You are currently viewing archived posts from the original EncapBoard (2002-2012).
Please visit the NEW EncapBoard carpet cleaning forum at http://Forum.Excellent-Supply.com to join an active online community for commercial carpet cleaning.

RETURN TO INDEX  

spray s.v.

January 7 2003 at 4:12 PM		 Bruce Gors  
I noticed when i was spraying s.v.
the solution started to foam blow bubles
not able to lay down enough solution.
Any ideas what i'm doing worng with my
pump up sprayer?
Thanks
Bruce

 
 
AuthorReply

Rick Gelinas

Re: spray s.v.

January 7 2003, 4:30 PM 

Try using a larger spray tip. We use a fan tip that provides a good flow rate. I’ll only “spray” Spin Vac when I'm using it as a pre-spray. Most of the actual cleaning that we do is accomplished by dispensing the product through the solution tank on the Cimex machine. But it can be done the way you're doing it. This is how Whittaker recommends using their encapsulator. It's also the way that the encapsulator is applied using the MasterBlend machine. So you'll just need to adjust your tip and you should be fine.

Rick Gelinas

 
 
DON_ ELDRED

spray s.v.

January 9 2003, 3:21 PM 

I have talked to Steamway and they think it is best to use a electric sprayer such as one would use to apply teflon for their mist n brush encapsulator

 
 
Current Topic - spray s.v.
RETURN TO INDEX  
EncapBoard Guidelines: 
 This forum has been provided by Excellent Supply Inc for sharing information about encapsulation cleaning technology and the business of commercial carpet cleaning.  
Excellent Supply Inc and its agents assume no responsibility for the accuracy of information displayed on this message board. You alone are responsible for any repercussions resulting from information posted here. Content posted on this message board may be used or published by Excellent Supply Inc. 
(1) Unauthorized advertising, promotion of rival products/brands, or listing items for sale without consent will not be permitted. 
(2) No profane, vulgar or abusive speech will be tolerated. Your privilege of posting may be blocked if you flame, use profanity, or are disrespectful. 
(3) We reserve the right to delete any post and block any  individual that we feel is inappropriate. 
(4) This forum is politically and religiously neutral, so please avoid discussing those subjects here.
(5) Maintain a good sense of humor! But keep it clean.
You are a guest here so we invite you to please post respectfully. Enjoy!

Cimex + Releasit = RESULTS
www.Excellent-Supply.com