This message board has been upgraded to a new forum with a number of user improvements.
You are currently viewing archived posts from the original EncapBoard (2002-2012).
Please visit the NEW EncapBoard carpet cleaning forum at http://Forum.Excellent-Supply.com to join an active online community for commercial carpet cleaning.

RETURN TO INDEX  

Pad driver question- Rick? Anybody?

December 22 2003 at 3:36 PM		 Gary R. Heacock  
Will the regular bonnet driver for my Chemstractor work to drive one of the pads? Or does the pads need a different driver?

Gary

 
 
AuthorReply
DON_ ELDRED

Re: Pad driver question- Rick? Anybody?

December 22 2003, 4:23 PM 

We have used a regular pad driver with our Chemspec bonnet machines with little or no trouble, the 15 or 17 inch fibreplus pads from Rick worked with these pad drivers

 
 
Barry Schrock

Re: Pad driver question- Rick? Anybody?

December 22 2003, 5:50 PM 

yes it works fine. Mine was quite old and the rubber was coming loose so replaced with one from hesco I like a bit better. Either one will do the job.

 
 

Rick Gelinas

Re: Re: Pad driver question- Rick? Anybody?

December 22 2003, 7:14 PM 

You can use a standard driver. But I like the Malish driver from Hesco the best. They work great and they're inexpensive too!

Here's what you'll need for your Chemstractor...

15" Driver Mighty-Lok $36.59 COM-715
Clutch Plate $4.74 COM-92

You can reach HESCO at 1-800-822-7467

BTW You're gonna need a BIG Phillips screw-driver and a STRONG hand to install the clutch plate - you'll see what I mean when you get it.




Rick Gelinas
ENCAPSULATION - How It Works

 
 
Barry Schrock

Re: Re: Re: Pad driver question- Rick? Anybody?

December 22 2003, 9:04 PM 

That's the truth you'll wear yourself out trying to screw it in with just a screw driver . But if you use a square shanked screw driver you can then use a crescent wrench to turn the screw driver. Much easier.

 
 
Gary R. Heacock

Re: Re: Re: Re: Pad driver question- Rick? Anybody?

December 26 2003, 9:07 PM 

Thanks for the info, guys!!

I will check into it.

Gary

 
 
Current Topic - Pad driver question- Rick? Anybody?
RETURN TO INDEX  
EncapBoard Guidelines: 
 This forum has been provided by Excellent Supply Inc for sharing information about encapsulation cleaning technology and the business of commercial carpet cleaning.  
Excellent Supply Inc and its agents assume no responsibility for the accuracy of information displayed on this message board. You alone are responsible for any repercussions resulting from information posted here. Content posted on this message board may be used or published by Excellent Supply Inc. 
(1) Unauthorized advertising, promotion of rival products/brands, or listing items for sale without consent will not be permitted. 
(2) No profane, vulgar or abusive speech will be tolerated. Your privilege of posting may be blocked if you flame, use profanity, or are disrespectful. 
(3) We reserve the right to delete any post and block any  individual that we feel is inappropriate. 
(4) This forum is politically and religiously neutral, so please avoid discussing those subjects here.
(5) Maintain a good sense of humor! But keep it clean.
You are a guest here so we invite you to please post respectfully. Enjoy!

Cimex + Releasit = RESULTS
www.Excellent-Supply.com