Hi Rick, I just won a contract for a appt complex. There are 4 floors that I am going to cimex. This place is trashed. It's in a big city and looks like it's never been cleaned. Stains are everywhere. MY question is there are 166 stairs that I will be cleaning and there is no way I'm going to HWE this job. I need to place an order(S)for cleaning these discusting
stair's. What do I need (include a good drill I can purchase from a hardware store). And I also need a corner tool and pole. Thx for all your help.

Ralph

You will need a variable speed drill, not a constant speed.

And what will you use to vac the stairs?

Gary

The drill driver will work great.

Do you have access to a rotary machine?
If you're real good with a rotary you could use it on the stairs.
That would be my recommendation for cleaning a lot of grungy stairs.

The Edge Brush works real well for cleaning along the baseboards/

And the Cimex will take care of the hallways.

If you need any help you can give me a call Monday, I'll be in the office in the afternoon.

Congratulations on landing the big account!




Rick Gelinas
encapman

You can just HWE the stairs.

Orbital buffer works great faster then the drill, a medium scrub brush works well, but if
I was going to be encaping a bunch of them a short handled Orick Orbiter or a small 12 inch rotary would be the way I would go, Koblens polisher will work also and you can get them cheap.

David

Plan on washing down the walls if you encap them...
My 90º buffer/polisher really splashes the juice around..