I am new to this forum but not to carpet cleaning. But in all the years that I have been cleaning I have yet to find anything that would phase blacktop sealer tracked in on carpet. You clean and clean and you still have that light brownish tint. I just bid a new account that would be great to have, but they have this problem. I will be using the Cimex. Any suggestions?

That is a challenging one as it is designed to protect asphalt like a shellac and may not be that easy to cut, if at all.

We have a lot of oil field service companies in our area and I know that we have had great success with Releasit on the tan from oil that is normally left behind. We just bump up the DS to 6 oz. per gallon and prepray with Punch and it comes out 100%.

Rick Thode
Releasit/Cimex Canada

Rick Thode nailed it.
Give that formula a try and see how it turns out.
I'd also add this, make PLENTY of slow passes using Max pads.
Let us know how you make out.





Rick Gelinas
encapman

I'm nervous posting after the guy who is the "Guru" Rick.
But I would bump up the prespray to 15 oz or more per gal of the punch. Cuts thru the crap quicker. Just my 2 cents.

Thanks for all the help guys. If I get the job I will let you know how it goes.

It's funny ..I just had this scenerio last week on a demo for 8 children centers. The owner explanined that they had the parking lot resealed and everyone was tracking it in. I presprayed heavily with punch and used my cimex with max pads. I mixed ds at 8oz per gal. Final result I got the call yesterday. When can u start... It works



Ralph

Congrats Ralph!! Did you use punch as a prespray and if so what ratio did you mix it at?

I mixed punch at 8oz per gal. It was only the foyer that I presprayed with punch, but I went heavy let sit for 10 min and then cimexed.. it looked great.



Ralph