This message board has been upgraded to a new forum with a number of user improvements.
You are currently viewing archived posts from the original EncapBoard (2002-2012).
Please visit the NEW EncapBoard carpet cleaning forum at http://Forum.Excellent-Supply.com to join an active online community for commercial carpet cleaning.

RETURN TO INDEX  

DS or Punch for Old School Bonnet?

April 4 2007 at 10:28 AM		 Ken Jacobs - Toronto  
Gents
I'm selling both DS & Punch.
which one is best for the old bonnet with green stripe pad and wall banger floor machine method?

Should I suggest the customer toss out the green bonnet pad and instead use the 19" Fiber Plus pad?

thank you

Ken Jacobs
Mississauga, Ontario Canada
www.cleaningequipment.ca

 
 
AuthorReply

CleanEvolve

Re: DS or Punch for Old School Bonnet?

April 4 2007, 11:16 AM 

I've been trying out the Releasit Punch and DS. I only have a 17" 175rpm floor machine. What I've been doing is pre-vac, pre-spray the Punch...dwell 5 minutes, Fiber-plus pad with floor machine, and then bonnet with the thick fluffy bonnets. So far it's been working quite well...although a Cimex seems to do a better job. That being said, if you only have a buffer/floor machine, it will works quite well.

 
 
Ken Jacobs - Toronto

Re: DS or Punch for Old School Bonnet?

April 4 2007, 11:18 AM 

I'm going to try the DS with a 300 RPM 21" floor machine and the Fiber Plus pads.

 
 

CleanEvolve

Re: DS or Punch for Old School Bonnet?

April 4 2007, 11:23 AM 

I'm not sure about the 300rpm floor machine...don't use it on residential...might be OK for commercial.

 
 
David Hebert

Re: DS or Punch for Old School Bonnet?

April 4 2007, 1:04 PM 

been running a 320 rotary on home carpeting for 12 years you need to know what carpets can handle it and what ones will not.

If it is a two speed run it on low


 
 
Ken

Re: DS or Punch for Old School Bonnet?

April 4 2007, 2:09 PM 

I have little interest in residential.

 
 

Rick Gelinas

Re: DS or Punch for Old School Bonnet?

April 4 2007, 3:04 PM 

Encap-Punch is the ticket for bonnet cleaning!






 Rick Gelinas
rick@excellent-supply.com

 
 
Current Topic - DS or Punch for Old School Bonnet?
RETURN TO INDEX  
EncapBoard Guidelines: 
 This forum has been provided by Excellent Supply Inc for sharing information about encapsulation cleaning technology and the business of commercial carpet cleaning.  
Excellent Supply Inc and its agents assume no responsibility for the accuracy of information displayed on this message board. You alone are responsible for any repercussions resulting from information posted here. Content posted on this message board may be used or published by Excellent Supply Inc. 
(1) Unauthorized advertising, promotion of rival products/brands, or listing items for sale without consent will not be permitted. 
(2) No profane, vulgar or abusive speech will be tolerated. Your privilege of posting may be blocked if you flame, use profanity, or are disrespectful. 
(3) We reserve the right to delete any post and block any  individual that we feel is inappropriate. 
(4) This forum is politically and religiously neutral, so please avoid discussing those subjects here.
(5) Maintain a good sense of humor! But keep it clean.
You are a guest here so we invite you to please post respectfully. Enjoy!

Cimex + Releasit = RESULTS
www.Excellent-Supply.com