Anyone use encap to clean microfiber upholstery ? I know if the tag says S, W or S/W it is safe using low mositure so long it is even and groomed afterwards.

You can use high moisture on that stuff, as long as you have sufficient recovery.

I cleaned a sectional sofa made of that stuff a couple of weeks ago. I used a sea sponge and releasit and did it all by hand. Towel dry and then used a small grooming brush on it, it looked great, the owner was really pleased with it.

Delia probably does a minimum of three, & up to six of these a week, using Releasit with Little Mak.

She prefers to use the bonnet rather than the pads.

After agitation with Little Mak; she then towels the fabric down to remove more soiling.

Then she will comb the fabric with a brass carding brush.

As most of our housing here have ceiling fans, a quick dry is rarely a problem.

Ooroo,

Shorty.

I've seen the light, and changed my wicked ways.
www.get.shorty.com.au

I HWE microfiber all the time and I tell you this stuff is easy as it gets. Polyester is what most of it is.

I use releasit as pre spray rub in with brush and then extract with Dri-eze. Then wipe off with a microfiber towel. Looks awesome every time.