This message board has been upgraded to a new forum with a number of user improvements.
You are currently viewing archived posts from the original EncapBoard (2002-2012).
Please visit the NEW EncapBoard carpet cleaning forum at http://Forum.Excellent-Supply.com to join an active online community for commercial carpet cleaning.

RETURN TO INDEX  

Red toner

August 28 2008 at 6:16 PM		 Brad  
Just got the call on red powered toner on CGD
They have only tried to vacuum it at this point.

I've read the posts on Vacuum, vacuum, vacuum. 50/50 DS with towel, post clean with FP pad.

My question is with it being red if there is still a tint can I do a heat treatment on it to get it out or will that set it in since it might react to heat. Any other suggestions would be great.

Thanks

Brad Lewis
Surface Solutions Inc

 
 
AuthorReply
Shorty

Banish with Vanish

August 28 2008, 6:52 PM 

I have had terrific success with vac-a-way's Red Vanish on several problem stains.

On a DRY fabric, I put on the Red Vanish & agitate slightly, leave for a few minutes, wipe with a towel which usually takes most of the stain out.

Then I apply 50/50 DS and blot up, or, if it's on carpet, simply go over the carpet with the 'Mex; & naturally some more juice

This product is also an encap; product, so no rinsing is required.

Ooroo

Shorty.



I've seen the light, and changed my wicked ways.
www.get.shorty.com.au

 
 

Rick Gelinas

Power Gel

August 28 2008, 9:10 PM 

Red Vanish is good, another alternative for toner is Power Gel.

All you need...

http://www.excellent-supply.com/store/pc/viewPrd.asp?idcategory=0&idproduct=289

Clean the spot by blotting with Power Gel mixed 20:1 with water. Blot it all up with a towel.
Then follow up by blotting the spot with Encap-Spot, or run over it with the Cimex using Releasit.









 Rick Gelinas
rick@excellent-supply.com


    
This message has been edited by cimex on Aug 29, 2008 3:37 PM
This message has been edited by cimex on Aug 29, 2008 5:58 AM
This message has been edited by cimex on Aug 28, 2008 9:32 PM
This message has been edited by cimex on Aug 28, 2008 9:12 PM


 
 
Shorty

What are you doing to me Rick ??

August 28 2008, 10:22 PM 

I can't find it !!!!!!!!!!!!

Does Gary stock it ??????????

Oh yeah, ;-(



We cannot find the requested product in our database.


OOroo

I've seen the light, and changed my wicked ways.
www.get.shorty.com.au

 
 

Del Scrivner

Re: What are you doing to me Rick ??

August 28 2008, 11:10 PM 

Thought I was the only one- WHEW!

Make you own luck,

Del Scrivner
Owner/Operator
Cowboy's Carpet Care

 
 

Rick Gelinas

Fixed the link

August 29 2008, 5:59 AM 

I fixed the link above. Sorry bout that.

http://www.excellent-supply.com/store/pc/viewPrd.asp?idcategory=0&idproduct=289








 Rick Gelinas
rick@excellent-supply.com

 
 

Del Scrivner

Re: Fixed the link

August 29 2008, 7:44 AM 

Yea!

Make you own luck,

Del Scrivner
Owner/Operator
Cowboy's Carpet Care

 
 
Jeff

Re: Fixed the link

August 29 2008, 2:19 PM 

Rick-
being its in a tube I usally don't dilute, do you suggest diluting in a spray bottle?

 
 

Rick Gelinas

Re: Fixed the link

August 29 2008, 10:01 PM 

You could dilute it in a spray bottle.

You could even dilute it in a little cup and dip a towel into the cup.







 Rick Gelinas
rick@excellent-supply.com

 
 
Brad

Re: Red toner

September 1 2008, 6:33 PM 

Thanks for all the responses,

Got lucky on this one, I asked them to leave it alone and not walk on it, and they did. Just used the wand on it, over and over and all the red came out. Sprayed a little 50/50 over the area and op'ed with FP, looks great.


Thanks

Brad Lewis
Surface Solutions Inc

 
 
Current Topic - Red toner
RETURN TO INDEX  
EncapBoard Guidelines: 
 This forum has been provided by Excellent Supply Inc for sharing information about encapsulation cleaning technology and the business of commercial carpet cleaning.  
Excellent Supply Inc and its agents assume no responsibility for the accuracy of information displayed on this message board. You alone are responsible for any repercussions resulting from information posted here. Content posted on this message board may be used or published by Excellent Supply Inc. 
(1) Unauthorized advertising, promotion of rival products/brands, or listing items for sale without consent will not be permitted. 
(2) No profane, vulgar or abusive speech will be tolerated. Your privilege of posting may be blocked if you flame, use profanity, or are disrespectful. 
(3) We reserve the right to delete any post and block any  individual that we feel is inappropriate. 
(4) This forum is politically and religiously neutral, so please avoid discussing those subjects here.
(5) Maintain a good sense of humor! But keep it clean.
You are a guest here so we invite you to please post respectfully. Enjoy!

Cimex + Releasit = RESULTS
www.Excellent-Supply.com