|
cleaning berberNovember 24 2008 at 10:20 PM |
red
|
| newbie here..........how will the cimex work on berber? if so what kind of pads?
|
|
| Author | Reply |
Rick Thode
| Re: cleaning berber | November 24 2008, 11:03 PM |
Red, that's were you'll see the magic. If there was ever a magic bullet for berber, the cimex/releasit combo has got to be it.
Rick Thode
rick.thode@releasit.ca
Your Canadian Source for Releasit/Cimex
|
|
red
| berber | November 24 2008, 11:27 PM |
that is exiting to hear as i had a nasty experience with it once. it was so soiled i had to put lots of water to it and well...........
|
|
Jeff
| Re: berber | November 25 2008, 7:48 AM |
Red-
I use the fibre plus pads and ReleaseIt DS, like Rick said awsome job on berber.
|
|
EncapDrew
| Re: berber | November 25 2008, 10:55 AM |
Berber is a notorious for wicking so you might want to mix 1 table spoon of citric acid powder per gallon of RTU. It will help reduce the chance of wicking.
|
|
Jeff
| Re: berber | November 25 2008, 12:41 PM |
I have never had a problem with wicking on berber using cimex or ReleaseIt DS, the low moisture quick dry eliminate the problem. If you ever do experience a wicking problem mix 50/50 mix ReleaseIT DS and mist it on after agitating only with lightly damp pads from cleaning other areas. The key here is agitation followed by heavy mix of encapsulation chem lightly.
|
|
admiralclean
| Re: berber | November 25 2008, 1:07 PM |
You folks aren't seriously talking about doing the vodoo cleaning on residential berbers are you?
Seriously ... ?
|
|
Dennis W.
| berber | November 27 2008, 1:05 AM |
I have a client with a olefin berber I threw the kitchen sink at and it wouldn't move one bit.
Finally I tried release it..bam!! comes out like a champ every time now.
|
|
Mr. Amazing
| cleaning berber | November 25 2008, 2:10 PM |
Pre spray with hydrox
fiber plus pads on cimex
ds in tank
works awesome
|
|
Jeff
| Re: cleaning berber | November 25 2008, 2:19 PM |
Rick had mentioned a while ago Hydrox should not be used with other ReleaseIt prodcuts, or did I misunderstand?
|
|
Del Scrivner
| You are correct- Hydrox polymer is NOT compatible with other Releasit products | November 25 2008, 7:01 PM |
You are correct- Hydrox polymer is NOT compatible with other Releasit products.
Make you own luck,
Del Scrivner
Owner/Operator
Cowboy's Carpet Care
|
|
Rambo
| Re: You are correct- Hydrox polymer is NOT compatible with other Releasit products | November 25 2008, 8:24 PM |
Marty, I don't think they think your serious, seriously.
|
|
Mr. Amazing
| You are correct- Hydrox polymer is NOT compatible with other Releasit products | November 26 2008, 6:13 PM |
Ooops. I figured since it said it was a pre spray it could be used with other stuff. Why than is it a pre spray? What should I be using with it?
|
|
Bill Martins
| Hydrox | November 27 2008, 12:53 PM |
Why not just put the Hydrox in your cimex tank? I don't have a cimex but use hydrox in my pump up and no other release-it chem, not needed. I have a stainmaster sprayer that i also do a 50/50 mix with the Hydrox, works pretty good.
|
|
| Current Topic - cleaning berber |
|
|
