Apologies to Richard and Kevin, Mex; tinkering.

Sorry Richard, but this is my favourite Mex;

Sorry Kev; no cliffs near Cairns

A little while back I said I would be getting the plate on my Mex; signed, well, Big Yella finally has it.

[IMG][/IMG]

I'd also had a small problem with the box that joins my cable from Big Yella to the extension, so I also attached a new box to the spotting box on the new aluminum plate.

[IMG][/IMG]

This one is much more secure, plus, being off set to the solution tank, and a tad further away, there is less chance of liquid getting into the electrical cable.

The extension lead goes in the top, then over my right shoulder and back to the GPO (wall socket for power)

[IMG][/IMG]

As you can see, a large spotting bottle easily fits into the box made for it.

[IMG][/IMG]

Some people have complained about their Mex; rolling around, so I thought I would show my "brake" This stops Big Yella rolling backwards when I'm mobile.

These photos are just for demonstartion, when in use, the clamp is placed on the wheelsupport, I then tilt Big Yella and move the wheel so that the clamp is against the support arm at the front.

[IMG][/IMG]

Simply turn the wheel to jam the clamp.

[IMG][/IMG]

Hope this helps someone.

Shorty down under.