This message board has been upgraded to a new forum with a number of user improvements.
You are currently viewing archived posts from the original EncapBoard (2002-2012).
Please visit the NEW EncapBoard carpet cleaning forum at http://Forum.Excellent-Supply.com to join an active online community for commercial carpet cleaning.

RETURN TO INDEX  

Scrubbing wax sealed ceramic tile with cimex

July 30 2011 at 10:52 PM		 joe S  
Quick question......should i spray floor with floor stripper then agitate with cimex then use shop vac to pic up most of solution then rinse with truckmount spinner tool.... oh ya the floor is sealed with wax med to heavy soiling...and if stripper is the first step do i need a degreaser after or an oxygen bleach product to brighten grout


    
This message has been edited by mojoe77 on Jul 30, 2011 11:05 PM


 
 
AuthorReply
David

Re: Scrubbing wax sealed ceramic tile with cimex

July 31 2011, 10:52 AM 

Never spray down floor stripper unless you do not care about your health.

Mop it down, let it sit for a while then mop down more let it sit then scrub . Basically follow the directions on the pail of stripper

 
 
Rick Lord

Wax on Grout Lines

July 31 2011, 7:17 PM 

Test the heck out of the floor first wax in the grout is real difficult and in some cases impossible to get all the staining out. In some cases you can run into a real mess. If it was sealed correctly with a good impregnating sealer you might be ok.
I always tell the customer they can expect a 75% to 80% improvement. You'd be much better off with a T&G porty or T&M and turbo. Scrub with the Cimex and rinse with Spinner at 1000-1200 psi. Be prepared for foaming because most strippers foam a bunch, carry lots of Defoamer.

 
 
Current Topic - Scrubbing wax sealed ceramic tile with cimex
RETURN TO INDEX  
EncapBoard Guidelines: 
 This forum has been provided by Excellent Supply Inc for sharing information about encapsulation cleaning technology and the business of commercial carpet cleaning.  
Excellent Supply Inc and its agents assume no responsibility for the accuracy of information displayed on this message board. You alone are responsible for any repercussions resulting from information posted here. Content posted on this message board may be used or published by Excellent Supply Inc. 
(1) Unauthorized advertising, promotion of rival products/brands, or listing items for sale without consent will not be permitted. 
(2) No profane, vulgar or abusive speech will be tolerated. Your privilege of posting may be blocked if you flame, use profanity, or are disrespectful. 
(3) We reserve the right to delete any post and block any  individual that we feel is inappropriate. 
(4) This forum is politically and religiously neutral, so please avoid discussing those subjects here.
(5) Maintain a good sense of humor! But keep it clean.
You are a guest here so we invite you to please post respectfully. Enjoy!

Cimex + Releasit = RESULTS
www.Excellent-Supply.com