+- Encapsulation carpet cleaning and commercial carpet care forum by Excellent-Supply.com & Releasit (https://forum.excellent-supply.com)
+-- Forum: Forum Home (https://forum.excellent-supply.com/forumdisplay.php?fid=1)
+--- Forum: GENERAL DISCUSSION (https://forum.excellent-supply.com/forumdisplay.php?fid=2)
+--- Thread: Filtration soil (/showthread.php?tid=1075)
Filtration soil - mark63 - 06-09-2014
I have a customer with filtration soil lines around the carpet, and was wondering the best way to handle it with vlm?
RE: Filtration soil - encapman - 06-09-2014
Here is the tool to use.
https://www.excellent-supply.com/Edge-Brush-Carpet-Cleaning-Accessory_p_11.html
Spray the filtration lines with a strong mixture of Encap-Punch and then run the Edge Brush along the line.
If Encap-Punch doesn't cut it, use CTI Power Gel sparingly.
https://www.excellent-supply.com/CTI-Pros-Choice-Power-Gel-Emulsifier-415-oz-118-ml-Tube-Commercial-Carpet-Cleaning-Stain-Remover_p_51.html
Apply diluted Power Gel sparingly with a spray bottle. Brush it in with the Edge Brush. Then run a towel along the filtration line underneath the Edge Brush to blot up the Power Gel. Lastly, follow up with Encap-Punch making a quick once over with the Edge Brush (this final step will encapsulate remaining Power Gel residue).
RE: Filtration soil - mark63 - 06-09-2014
Thanks, What would you recomend for a strong mixture of punch (50/50)
RE: Filtration soil - encapman - 06-09-2014
16 oz per gallon.
RE: Filtration soil - cleancorp - 06-18-2014
I will have to try that ratio of punch. I generally mix ds2 50/50 to tackle filtration lines. Works great.