How much solution do you spray on a carpet ? - Printable Version +- Encapsulation carpet cleaning and commercial carpet care forum by Excellent-Supply.com & Releasit (https://forum.excellent-supply.com) +-- Forum: Forum Home (https://forum.excellent-supply.com/forumdisplay.php?fid=1) +--- Forum: GENERAL DISCUSSION (https://forum.excellent-supply.com/forumdisplay.php?fid=2) +--- Thread: How much solution do you spray on a carpet ? (/showthread.php?tid=1589) |
How much solution do you spray on a carpet ? - MikeHabib - 09-01-2015 I am curious as to how much solution you guy's spray on a carpet ? I use a pump sprayer and normally spray down enough for one pass. I am wondering if I need to use a little more. RE: How much solution do you spray on a carpet ? - encapman - 09-02-2015 (09-01-2015, 11:25 PM)MikeHabib Wrote: I am curious as to how much solution you guy's spray on a carpet ? I use a pump sprayer and normally spray down enough for one pass. I am wondering if I need to use a little more. You want the carpet to be fairly damp. You need enough juice to move the solution, and prevent the pad/bonnet from getting too dry. Don't soak the carpet, but get it sufficiently damp. Normally for bonnet cleaning, it ranges between 300-500 sq ft per gallon of rtu solution. RE: How much solution do you spray on a carpet ? - lee@deepclean.us.com - 09-02-2015 Wet enough to get the solution to "whiten" just a bit when going over with machine. RE: How much solution do you spray on a carpet ? - MikeHabib - 09-02-2015 Thanks Guy's. Based on what Rick said I am not using enough and that could explain when I encap only there are times that I am not getting the results that I want. RE: How much solution do you spray on a carpet ? - encapman - 09-02-2015 The number I gave you above was for "bonnet cleaning". If you're doing straight Encap cleaning then you should be topping out at at about 300 sq ft of rtu solution. |