+- Encapsulation carpet cleaning and commercial carpet care forum by Excellent-Supply.com & Releasit (https://forum.excellent-supply.com)
+-- Forum: Forum Home (https://forum.excellent-supply.com/forumdisplay.php?fid=1)
+--- Forum: GENERAL DISCUSSION (https://forum.excellent-supply.com/forumdisplay.php?fid=2)
+--- Thread: Cylindrical Brush machine (/showthread.php?tid=181)
Cylindrical Brush machine - Kleen O' green - 11-04-2012
The moisture recovery is a part of the process. So then putting down carpet protector (soileze) its not a good idea to use the this machine. As some of protector will end up in recovery tank.
THOUGHTS?
RE: Cylindrical Brush machine - Cairnswun - 11-04-2012
Please explain ??
Shorty.
RE: Cylindrical Brush machine - encapman - 11-04-2012
Not sure that I'm understanding the question. A cylindrical brush machine doesn't extract solution. In fact using a cylindrical brush machine to work protector is a good way to work the protector down into the fiber.
RE: Cylindrical Brush machine - Kleen O' green - 11-05-2012
In fact using a cylindrical brush machine to work protector is a good way to work the protector down into the fiber. (encapman's post)
That is the same thought I had as well.
However I cleaned resi with cimex and OP on different occasions. I used CRB to groom and my recovery tank was full of solution and fillers. So I decided that will just use my Penguin to put down Protector. But when I use Penguin I get 300-350 sq ft per gallon of protector.
RE: Cylindrical Brush machine - encapman - 11-05-2012
Which CRB machine are you using?
RE: Cylindrical Brush machine - Kleen O' green - 11-05-2012
Not Icapsol, not but the other. Not on your site anymore
REPHRASE: The moisture recovery is a part of ITS FUNCTION.
RE: Cylindrical Brush machine - encapman - 11-05-2012
The iCapsol/ProCaps machine doesn't recover very much solution. It'll pick a little, along with some carpet fuzz. But the amount of liquid it will recover from the carpet is negligible. I wouldn't worry about it.
RE: Cylindrical Brush machine - Kleen O' green - 11-06-2012
Thanks... The sprint is what I have. Sorry I was having a senior citizen moment earlier.
RE: Cylindrical Brush machine - encapman - 11-06-2012
Ahhh, now I can appreciate what you're talking about. The Sprint will in fact bring up a little bit of the moisture from the carpet. Try this... Remove the recovery tray from the back of the machine while applying protector. It won't recover liquid if the tank has been removed.
BTW I have plenty of senior moments too
