Cotton fabric - Printable Version +- Encapsulation carpet cleaning and commercial carpet care forum by Excellent-Supply.com & Releasit (https://forum.excellent-supply.com) +-- Forum: Forum Home (https://forum.excellent-supply.com/forumdisplay.php?fid=1) +--- Forum: GENERAL DISCUSSION (https://forum.excellent-supply.com/forumdisplay.php?fid=2) +--- Thread: Cotton fabric (/showthread.php?tid=2407) |
Cotton fabric - KennyWright - 09-13-2017 In a couple weeks, I have a job that involves furniture with older cotton white and blue striped fabric. I will use a bucket to mix up/whip up some Hydrox to be applied with a horsehair brush and the vacuum after drying. What Hydrox to water ratio should I use? RE: Cotton fabric - encapman - 09-13-2017 8 ounces per gallon should work well. Try to minimize moisture. Get some fans on it too. RE: Cotton fabric - KennyWright - 09-13-2017 I should have added that it has what appear to be some existing water or drink spots. Do you think 8 oz per gallon will be enough to address the existing spots and prevent further spotting ? I will use fans, thanks. RE: Cotton fabric - encapman - 09-13-2017 You could spot full strength. Then clean like you outlined. But under-promise! Old cotton can be a challenge. Encap-HydrOx works well on cotton. But you're approaching a difficult piece. So proceed carefully. RE: Cotton fabric - KennyWright - 09-13-2017 Thanks! Under promise is always good advice. RE: Cotton fabric - Lounge Lizards - 09-14-2017 With those cotton stripes, CHECK FIRST FOR COLOR BLEED. Previously, I have found many that were not colour fast & the black bled into the white. RE: Cotton fabric - encapman - 09-14-2017 Excellent advice! |