Encapsulation carpet cleaning and commercial carpet care forum by Excellent-Supply.com & Releasit
Punch as a Pre-Spray - Printable Version

+- Encapsulation carpet cleaning and commercial carpet care forum by Excellent-Supply.com & Releasit (https://forum.excellent-supply.com)
+-- Forum: Forum Home (https://forum.excellent-supply.com/forumdisplay.php?fid=1)
+--- Forum: GENERAL DISCUSSION (https://forum.excellent-supply.com/forumdisplay.php?fid=2)
+--- Thread: Punch as a Pre-Spray (/showthread.php?tid=435)



Punch as a Pre-Spray - Ed E - 04-25-2013

Did a nasty retail client tonight with heavy traffic lane dirt. Used Punch as a pre-spray, then DS2.

I pre-sprayed all of the traffic lanes, then went about cleaning. Just took me awhile to get through all of the space. The question I have about Punch is, does it matter if you pre-sprayed two hours earlier, or should you stage your pre-spray so that it is "fresh". I always operated under the assumption that time is your friend, when it comes to chemistry.

Any thoughts?


RE: Punch as a Pre-Spray - Derek - 04-25-2013

any prespray is meant to be used before it dries. 10-15 minutes is a good range. 2 hours it was most likely dry before you got to it.


RE: Punch as a Pre-Spray - encapman - 04-25-2013

Derek nailed it.

Once a pre-spray is dry it's no longer active.


RE: Punch as a Pre-Spray - supersteem33 - 04-26-2013

Yes I have been noticing that lately with my prespray. I was wondering why the carpet has been more stubborn than I would like, I have been letting the prespray stay down to long. Thanks for the info.


RE: Punch as a Pre-Spray - Ed E - 04-27-2013

I went back for a post-vac the next day, and to perform a customer satisfaction check. The customer was thrilled, but there were a few spots in the traffic lanes that were just not right. So I will return and re-address those on Monday. Lesson learned on the Punch pre-spray.... Thx-Ed