+- Encapsulation carpet cleaning and commercial carpet care forum by Excellent-Supply.com & Releasit (https://forum.excellent-supply.com)
+-- Forum: Forum Home (https://forum.excellent-supply.com/forumdisplay.php?fid=1)
+--- Forum: GENERAL DISCUSSION (https://forum.excellent-supply.com/forumdisplay.php?fid=2)
+--- Thread: PUNCH mixing ratio (/showthread.php?tid=491)
PUNCH mixing ratio - BGCD - 05-20-2013
If you are using Punch only to clean what are the correct mixing dilutions? Heavy, Medium, and Light soiling.
And if you want to add Punch to DS2. How do you guys mix it?
Thanks
RE: PUNCH mixing ratio - encapman - 05-20-2013
No need to add Encap-Punch to Encap-Clean DS2. You'll see better results using it as a pre-spray ahead of your normal cleaning with Encap-Clean DS2
Here are the directions for using Encap-Punch...
TRAFFIC LANE PRE-SPRAY:
Light Soil = 8 oz 1:16 per gal of hot water
Medium Soil = 10 oz 1:12 per gal of hot water
Heavy Soil = 12 oz 1:10 per gal of hot water
HOT WATER EXTRACTION RINSE DETERGENT:
Truckmount: 40 oz per 5 gal of stock solution
Portables: 1-2 oz per gal of hot water
BONNET / PAD CLEANING:
8 ounces per gal of hot water
RE: PUNCH mixing ratio - BGCD - 05-20-2013
Thanks Rick.