+- Encapsulation carpet cleaning and commercial carpet care forum by Excellent-Supply.com & Releasit (https://forum.excellent-supply.com)
+-- Forum: Forum Home (https://forum.excellent-supply.com/forumdisplay.php?fid=1)
+--- Forum: GENERAL DISCUSSION (https://forum.excellent-supply.com/forumdisplay.php?fid=2)
+--- Thread: CRB brush repair (/showthread.php?tid=787)
CRB brush repair - MikeB - 10-27-2013
We all know NOT to leave a CRB standing upright because the brushes can get flat spots right?
Of course we do.....well about 3 weeks ago I left mine in my shop, yes standing on its brushes. Why? In a hurry....starting a new day job. "I'll come back in a minute and put it on the caddy" I thought to myself.
Well today was the day I remembered what I did and for those of you who might be wondering how to fix flat brushes, here's a tip.
HOT water In my utility tub ( or bucket) and resting them in there for about 5 minutes....reinstalled brushes in opposite positions (front to back) ran machine for a few minutes ...hopped a bit for a minute or two. Then walaaaa!
Running smooth again.
Lesson learned!
Sent from my iPhone
RE: CRB brush repair - lee@deepclean.us.com - 10-27-2013
Excellent suggestion Mike! Its good to know there is a way to fix that!
Lee
RE: CRB brush repair - encapman - 10-27-2013
Dang you Mike. The way to fix those is to call 1-800-330-1888 and order another set.
P.S. Great tip. Thanks for sharing that.
CRB brush repair - MikeB - 10-27-2013
Oh yeah. You're right Rick!
Please disregard that insane previous post.
Sent from my iPhone
RE: CRB brush repair - Derek - 10-27-2013
great post, tx Mike!