+- Encapsulation carpet cleaning and commercial carpet care forum by Excellent-Supply.com & Releasit (https://forum.excellent-supply.com)
+-- Forum: Forum Home (https://forum.excellent-supply.com/forumdisplay.php?fid=1)
+--- Forum: GENERAL DISCUSSION (https://forum.excellent-supply.com/forumdisplay.php?fid=2)
+--- Thread: Cimex problems (/showthread.php?tid=994)
Cimex problems - Russian17 - 03-26-2014
Salution coming out between motor plate and top of buffer wheel
RE: Cimex problems - encapman - 03-26-2014
What you've described is caused by a blockage in your Cimex plumbing. Your Cimex Plumbing should be cleaned out on a regular basis. Here is a PDF file showing how to do it.
http://excellent-supply.com/CIMEX_FLOW_MAINTENANCE_INSTRUCTIONS.PDF
It's also a good idea to empty the machine if it won't be used the next day. And if you're planning to store the machine for more than a few of days, it's good to run some hot water through the machine to keep the system flushed out.
This will keep your machine's plumbing flowing smoothly like a new machine.
RE: Cimex problems - Russian17 - 03-26-2014
Thanks mr encapman
How do you unblock the clog
RE: Cimex problems - encapman - 03-27-2014
A full set of instructions is in the link that I posted.
http://excellent-supply.com/CIMEX_FLOW_M...CTIONS.PDF
RE: Cimex problems - Kevin OBrien - 04-02-2014
Great tip, any more keep them coming.