|
Cimex Weight and Dimensions
|
|
10-22-2013, 04:14 PM
What are the weights and dimensions of the Cimex CR48 and CR38?
***********************
Robert Balliot President Hoss Home Care, LLC http://hosshomecare.com http://www.linkedin.com/in/robertballiot ***********************
10-23-2013, 10:26 AM
Robert, here is a link to the specs for the various Cimex scrubbers....
http://cimex-usa.com/pdf/NewCyclone_CRSC_complete.pdf
Rod Clarkin
Excellent Supply 727-821-2020
Weight: Heavy. Dimensions: Large.
Thanks Rod. I saw the spec sheet earlier. But, it shows a height of 44 cm - about 17". Maybe they are that height flattened down on the floor, but I would be transporting upright. The length shows 29" for a 38, but it is unclear what dimension that is, maybe it would be the front of the machine to the back of the wheels.
It also shows the pad brush diameter as 6.5 cm or about 2.5 inches. It that is the case, then I could use the centers of my fiber max pads.  Still looking for dimensions that make sense.
***********************
Robert Balliot President Hoss Home Care, LLC http://hosshomecare.com http://www.linkedin.com/in/robertballiot ***********************
10-25-2013, 04:33 PM
(This post was last modified: 10-25-2013, 04:34 PM by encaprodney.)
CR38= 16 inches wide, 29 inches long (front to back of wheels), and 44 inches high (from floor to top of handle)
Rod Clarkin
Excellent Supply 727-821-2020 |
