08-16-2015, 07:12 AM
Yesterday i made a commercial job of 3500 sq. ft. It was only one hall and several offices.
The small offices had heavy traffic lanes and under the desks it was very dirty and even some pile distortion of the chairs.
I used DS2, my 175, microfiber bonnets and superzorbs.
I vaccumed first sprayed the DS2 with my 10 litre pump up sprayer and then startet with the microfiber bonnets. Should i better let dwell a bit?
On the traffic lanes and under the desks i needed a lot more passes and i used the superzorbs after the microfiber. Worked good but it took me very long to get the dark, dirty areas clean.
I used hot water. No dwell time.
How can i work and clean more effective?
Should i let dwell the solution? Should i use some pads first (have some white vct pads) and then the superzorbs?
It took me to long to clean the realy dirty areas and i would like to get some advice how to handle them more faster.
The small offices had heavy traffic lanes and under the desks it was very dirty and even some pile distortion of the chairs.
I used DS2, my 175, microfiber bonnets and superzorbs.
I vaccumed first sprayed the DS2 with my 10 litre pump up sprayer and then startet with the microfiber bonnets. Should i better let dwell a bit?
On the traffic lanes and under the desks i needed a lot more passes and i used the superzorbs after the microfiber. Worked good but it took me very long to get the dark, dirty areas clean.
I used hot water. No dwell time.
How can i work and clean more effective?
Should i let dwell the solution? Should i use some pads first (have some white vct pads) and then the superzorbs?
It took me to long to clean the realy dirty areas and i would like to get some advice how to handle them more faster.
