Thanks for the help guys, it looks like my problem is more the gravity fed solution thing.....I was in such a tight area working around desks and cubicles and it was hard for me to start the solution at the beginning and end it at the right spot, so I had some overly wet spots and other dry spots. My worst areas were ones where I couldn't walk in a straight line and was making constant turns around tables and such. I also bought a Dyson DC-14 vacuum and i'm hoping that helps some with causing the carpet to appear more uniform.
Rick, two questions:
1. Since i have a 17" floor machine, should i buy a 17" or 19" microbeast bonnet?
2. Since the carpet is already wet from the Cimex, when I post-bonnet with the 175 should I add any DS2 to the pad or spray any more DS2 onto the floor?
Thanks!
Rick, two questions:
1. Since i have a 17" floor machine, should i buy a 17" or 19" microbeast bonnet?
2. Since the carpet is already wet from the Cimex, when I post-bonnet with the 175 should I add any DS2 to the pad or spray any more DS2 onto the floor?
Thanks!