07-04-2015, 07:57 AM
1. I prefer to use a slightly larger bonnet than the actual driver. Check your driver width. Often a machine will have a bonnet that's 2" smaller than the machine - so a 15" machine will have a 15" bonnet. So you could go 2" larger than your actual driver width. If you have a 15" driver get a 17" bonnet. If you actually have a 17" driver, get a 17" bonnet.
2. Yes, as long as the carpet is still damp following the cleaning with the Cimex, you could simply run over the carpet with a pre-dampened bonnet. Make sure though that you're not running a dry bonnet over sections of carpet that have already dried. The Microbeast bonnets are an excellent choice for what you're considering.
2. Yes, as long as the carpet is still damp following the cleaning with the Cimex, you could simply run over the carpet with a pre-dampened bonnet. Make sure though that you're not running a dry bonnet over sections of carpet that have already dried. The Microbeast bonnets are an excellent choice for what you're considering.