10-23-2015, 06:31 AM
19" is the correct size for a 17" driver. That is supposing that you have a 17" driver. If your machine is a 17" machine - then normally your driver is 2" smaller i.e. 15", in which case a 17" bonnet will work.
Rule of thumb: Pad drivers are typically 2" smaller than the deck of the machine. And you should always use a bonnet that's 2" larger than the width of your actual pad driver.
Rule of thumb: Pad drivers are typically 2" smaller than the deck of the machine. And you should always use a bonnet that's 2" larger than the width of your actual pad driver.