10-23-2015, 06:50 AM
(10-23-2015, 06:31 AM)encapman Wrote: 19" is the correct size for a 17" driver. That is supposing that you have a 17" driver. If your machine is a 17" machine - then normally your driver is 2" smaller i.e. 15", in which case a 17" bonnet will work.
Rule of thumb: Pad drivers are typically 2" smaller than the deck of the machine. And you should always use a bonnet that's 2" larger than the width of your actual pad driver.
Ok thank you. It should work with the 17" pads. I have read they can be rinsed during a job?! Does it make any difference when using on job a "fresh" one instead of a rinsed one?