Rotovac 360i

[Lounge Lizards]

Hi all, I’m chasing some information on encapsulation cleaning &/or bonnet cleaning using a Rotovac 360i.


I currently have a client that has in excess of 80 townhouses, spread over five different buildings.

These buildings are generally three stories high, some more, some only two levels, all built above the car park.
The top levels are all town houses of either two bedrooms or three bedrooms with a study.
All lower level condos are either two or three bedroom.


These are all vacuumed daily by in-house cleaners.
It’s only the town houses that I’m concerned with as they all have these very narrow timber stairs with a sharp 90degree turn both at the top and the bottom.
As you can see by the pics, the Cimex is a tight fit to manoeuvre around where the stairs angle.
The shoe is to give an idea of step size.


Not impossible, but after taking it up three flights, well, let’s just say I’m not getting any younger.
I was looking at using my 360i due to its light weight, ONLY IF IT’S PRACTICAL.
I look forward to any dialogue in this respect.


Ta,