11-15-2015, 12:09 PM
Encap-HydrOx will work great on the coffee spills. That's the one I'd suggest.
You can learn to strip and recoat vct, it's not all that hard.
1. Apply a plentiful amount of diluted stripper to the floor.
2. With Lightning Strip pads on your Cimex, scrub the floor. Dispense plain water as us rub the floor.
3. Wet Vac the floor. And rinse the floor thoroughly.
4. After the floor is dry, apply 4 coats of a good quality floor finish.
That's the simplified explanation. Time and practice will be invaluable. But with a little time on the floor, you'll be up to speed in no time. I agree, taking all of the floor surfaces is essential. That's why we always offered floor& carpet care in our cleaning business. Otherwise your competition will wipe the floor with you (pun intended).
You can learn to strip and recoat vct, it's not all that hard.
1. Apply a plentiful amount of diluted stripper to the floor.
2. With Lightning Strip pads on your Cimex, scrub the floor. Dispense plain water as us rub the floor.
3. Wet Vac the floor. And rinse the floor thoroughly.
4. After the floor is dry, apply 4 coats of a good quality floor finish.
That's the simplified explanation. Time and practice will be invaluable. But with a little time on the floor, you'll be up to speed in no time. I agree, taking all of the floor surfaces is essential. That's why we always offered floor& carpet care in our cleaning business. Otherwise your competition will wipe the floor with you (pun intended).