11-20-2015, 09:43 AM
Thanks AussieOrbotman, I read with interest your comments, sorry for the late reply, I have been surfing and reading post after post trying to devolp a model that suits what I want to acheive. The MyTee did catch my eye as good value and have read lots of good things re the Orbot. I really hope things are working well for you.
I have changed tact a bit lately and if I do go ahead and get into carpet care I'll probably start with residential first. A couple of kids (11 &13) after hours and weekends probably won't suit going after commercial onl at this stage.
I like the idea of CRB, encap and dry sponges as a method I could manage and I liked the no moisture angle as a sales method. Trying to stand out from the norm TM process is something I would like to achieve. I came across this system whilst "Reasearching" different approaches.
http://www.kerrick.com.au/products/shamp...n-brush-2/
It sprays, agitates and vacs in one process. Made in Italy by Santoemma they claim fast extraction and 1 hour dry times which fits my thoughts at this stage. Not big numbers in spray pressue vac lift etc but I particularly like the brush/agitation & LM
I was hoping for some suggestions on what chems to use if I go down this path. Would I
1 Dry vac with Sebo X5, use a traffic type prespray and then a HWE detergent to extract.
2 Dry vac with Sebo X5, prespray with encap and extract with the same encap product.
3 Dry vac with Sebo X5, prespray with encap and extract with plain water (not sure if this would dilute to much of the encap prespray.
It's a bit late here and im a bit tired to edit the post so I trust it makes sense.
any advice welcome.
cheers
Tony
I have changed tact a bit lately and if I do go ahead and get into carpet care I'll probably start with residential first. A couple of kids (11 &13) after hours and weekends probably won't suit going after commercial onl at this stage.
I like the idea of CRB, encap and dry sponges as a method I could manage and I liked the no moisture angle as a sales method. Trying to stand out from the norm TM process is something I would like to achieve. I came across this system whilst "Reasearching" different approaches.
http://www.kerrick.com.au/products/shamp...n-brush-2/
It sprays, agitates and vacs in one process. Made in Italy by Santoemma they claim fast extraction and 1 hour dry times which fits my thoughts at this stage. Not big numbers in spray pressue vac lift etc but I particularly like the brush/agitation & LM
I was hoping for some suggestions on what chems to use if I go down this path. Would I
1 Dry vac with Sebo X5, use a traffic type prespray and then a HWE detergent to extract.
2 Dry vac with Sebo X5, prespray with encap and extract with the same encap product.
3 Dry vac with Sebo X5, prespray with encap and extract with plain water (not sure if this would dilute to much of the encap prespray.
It's a bit late here and im a bit tired to edit the post so I trust it makes sense.
any advice welcome.
cheers
Tony