• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Cimex vs 175 Rotary Machine
#4
Thank for the feedback.

So, based on what you are saying, I tried a CGD hallway where everybody walks by everyday from outside including snow and salt and gets cleaned probably once or twice a year. The carpet overall is crazy dirty. Cimex did not do amazing, it may have been worn out.

Would hot water extraction followed by Cimex next day work best?
Or would cimex 2 days in a row work better?
Does using the cimex more times provide you a better job or once is enough to see if the job can be succesful or not?

On Hallways that are not that dirty but have stains everywhere as there is animals or garbage spills or even a coffee spilled, I haven't got much success with Cimex, should I prespray the stains with something else or is there any other method or just pass Cimex and if the stains didn't go away, thats it? (As compared to carpet extrators where you prespray or have a spot kit for any special stain)
  Reply


Messages In This Thread
Cimex vs 175 Rotary Machine - by Gero43 - 01-10-2016, 08:19 PM
RE: Cimex vs 175 Rotary Machine - by MikeHabib - 01-11-2016, 09:54 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 01-11-2016, 03:09 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 01-12-2016, 05:29 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 01-12-2016, 07:05 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 01-13-2016, 08:37 AM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 01-19-2016, 07:01 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 01-19-2016, 09:00 AM
RE: Cimex vs 175 Rotary Machine - by leofry@1966 - 01-25-2016, 11:04 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 01-25-2016, 12:28 PM
RE: Cimex vs 175 Rotary Machine - by leofry@1966 - 01-25-2016, 01:07 PM
RE: Cimex vs 175 Rotary Machine - by encapman - 01-25-2016, 03:16 PM
RE: Cimex vs 175 Rotary Machine - by Rick J - 01-27-2016, 12:07 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 01-27-2016, 07:16 AM
RE: Cimex vs 175 Rotary Machine - by GroovyJon - 01-28-2016, 10:13 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 01-29-2016, 01:42 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 03-05-2016, 08:07 PM
RE: Cimex vs 175 Rotary Machine - by encapman - 03-05-2016, 11:40 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 03-16-2016, 03:36 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 03-16-2016, 07:13 AM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 03-16-2016, 09:04 PM
RE: Cimex vs 175 Rotary Machine - by encapman - 03-16-2016, 09:42 PM
RE: Cimex vs 175 Rotary Machine - by encapman - 03-17-2016, 05:13 PM
RE: Cimex vs 175 Rotary Machine - by encapman - 10-01-2016, 11:53 PM
RE: Cimex vs 175 Rotary Machine - by GroovyJon - 03-22-2016, 11:59 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 03-23-2016, 03:50 PM
RE: Cimex vs 175 Rotary Machine - by FloorCareMD - 03-29-2016, 12:29 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 04-10-2016, 06:56 PM
RE: Cimex vs 175 Rotary Machine - by encapman - 04-10-2016, 09:51 PM
RE: Cimex vs 175 Rotary Machine - by FloorCareMD - 03-29-2016, 03:07 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 10-01-2016, 12:52 AM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 10-02-2016, 02:30 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 10-02-2016, 07:28 AM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 10-04-2016, 06:13 PM
RE: Cimex vs 175 Rotary Machine - by encapman - 10-04-2016, 07:58 PM
RE: Cimex vs 175 Rotary Machine - by richgallina - 10-11-2016, 12:32 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 10-22-2016, 04:49 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 10-22-2016, 06:41 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 11-04-2016, 01:18 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 11-04-2016, 05:32 PM
RE: Cimex vs 175 Rotary Machine - by Charles - 11-05-2016, 02:00 PM
AW: RE: Cimex vs 175 Rotary Machine - by Bernd - 11-05-2016, 05:19 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 11-09-2016, 09:14 PM
RE: Cimex vs 175 Rotary Machine - by Charles - 11-10-2016, 09:37 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 11-10-2016, 02:27 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 11-18-2016, 02:16 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 11-18-2016, 07:23 AM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 12-12-2016, 02:10 PM
RE: Cimex vs 175 Rotary Machine - by encapman - 12-12-2016, 11:50 PM



Users browsing this thread: 3 Guest(s)