• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Cimex vs 175 Rotary Machine
#5
As I mentioned above, sometimes HWE is the best option. After all it has the ability to unload the carpet of humongous soil loads. But plan for humongous wicking too. So a post-encapping may likely be required to get that under control.

Working with the right encap solution is a huge factor. I hear from guys all the time who say they've tried encap but weren't blown away, but they haven't tried Releasit yet. Well it could be said that they really HAVEN'T experienced encap; at least not encap at its highest level. For ice melt - Encap-HydrOx is what you NEED. It will blow ice melt to pieces and eliminate the brownish staining that occurs. Using Encap-Clean DS2 for everyday soil loads is a what I recommend. It is amazing! Encap-Clean DS2 plows through normal to heavy soil loads quick and easy. It will make the carpet shine!

You also need to factor in your skill level working with the Cimex. It takes a little bit of practice to become good at it. Learning how much solution to apply, avoiding over-wetting, getting a handle on how many passes to make for various soil loads, and learning how fast to walk is all part of the technique. Once you're proficient with the Cimex though - it can bulldoze right through the worst of it. You'll have a formidable commercial cleaning combo when you use the Cimex with high quality encap sauce!

I hope this helps you to get a better picture of what you can expect. If I can assist you to get up to speed with the Cimex I'll be happy to help walk you through it. Send me a PM with your phone number and we can talk for a few a minutes. That should help you get a handle on running the Cimex.
  Reply


Messages In This Thread
Cimex vs 175 Rotary Machine - by Gero43 - 01-10-2016, 08:19 PM
RE: Cimex vs 175 Rotary Machine - by MikeHabib - 01-11-2016, 09:54 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 01-11-2016, 03:09 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 01-12-2016, 05:29 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 01-12-2016, 07:05 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 01-13-2016, 08:37 AM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 01-19-2016, 07:01 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 01-19-2016, 09:00 AM
RE: Cimex vs 175 Rotary Machine - by leofry@1966 - 01-25-2016, 11:04 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 01-25-2016, 12:28 PM
RE: Cimex vs 175 Rotary Machine - by leofry@1966 - 01-25-2016, 01:07 PM
RE: Cimex vs 175 Rotary Machine - by encapman - 01-25-2016, 03:16 PM
RE: Cimex vs 175 Rotary Machine - by Rick J - 01-27-2016, 12:07 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 01-27-2016, 07:16 AM
RE: Cimex vs 175 Rotary Machine - by GroovyJon - 01-28-2016, 10:13 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 01-29-2016, 01:42 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 03-05-2016, 08:07 PM
RE: Cimex vs 175 Rotary Machine - by encapman - 03-05-2016, 11:40 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 03-16-2016, 03:36 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 03-16-2016, 07:13 AM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 03-16-2016, 09:04 PM
RE: Cimex vs 175 Rotary Machine - by encapman - 03-16-2016, 09:42 PM
RE: Cimex vs 175 Rotary Machine - by encapman - 03-17-2016, 05:13 PM
RE: Cimex vs 175 Rotary Machine - by encapman - 10-01-2016, 11:53 PM
RE: Cimex vs 175 Rotary Machine - by GroovyJon - 03-22-2016, 11:59 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 03-23-2016, 03:50 PM
RE: Cimex vs 175 Rotary Machine - by FloorCareMD - 03-29-2016, 12:29 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 04-10-2016, 06:56 PM
RE: Cimex vs 175 Rotary Machine - by encapman - 04-10-2016, 09:51 PM
RE: Cimex vs 175 Rotary Machine - by FloorCareMD - 03-29-2016, 03:07 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 10-01-2016, 12:52 AM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 10-02-2016, 02:30 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 10-02-2016, 07:28 AM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 10-04-2016, 06:13 PM
RE: Cimex vs 175 Rotary Machine - by encapman - 10-04-2016, 07:58 PM
RE: Cimex vs 175 Rotary Machine - by richgallina - 10-11-2016, 12:32 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 10-22-2016, 04:49 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 10-22-2016, 06:41 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 11-04-2016, 01:18 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 11-04-2016, 05:32 PM
RE: Cimex vs 175 Rotary Machine - by Charles - 11-05-2016, 02:00 PM
AW: RE: Cimex vs 175 Rotary Machine - by Bernd - 11-05-2016, 05:19 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 11-09-2016, 09:14 PM
RE: Cimex vs 175 Rotary Machine - by Charles - 11-10-2016, 09:37 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 11-10-2016, 02:27 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 11-18-2016, 02:16 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 11-18-2016, 07:23 AM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 12-12-2016, 02:10 PM
RE: Cimex vs 175 Rotary Machine - by encapman - 12-12-2016, 11:50 PM



Users browsing this thread: 11 Guest(s)