• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Cimex vs 175 Rotary Machine
#29
Yes, if for some reason a person was determined to remove the swirl marks, they could quickly run over the carpet with a CRB while the carpet is still wet. They would then be able to replace the swirl marks with brushed pile markings instead. Wink
  Reply


Messages In This Thread
Cimex vs 175 Rotary Machine - by Gero43 - 01-10-2016, 08:19 PM
RE: Cimex vs 175 Rotary Machine - by MikeHabib - 01-11-2016, 09:54 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 01-11-2016, 03:09 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 01-12-2016, 05:29 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 01-12-2016, 07:05 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 01-13-2016, 08:37 AM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 01-19-2016, 07:01 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 01-19-2016, 09:00 AM
RE: Cimex vs 175 Rotary Machine - by leofry@1966 - 01-25-2016, 11:04 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 01-25-2016, 12:28 PM
RE: Cimex vs 175 Rotary Machine - by leofry@1966 - 01-25-2016, 01:07 PM
RE: Cimex vs 175 Rotary Machine - by encapman - 01-25-2016, 03:16 PM
RE: Cimex vs 175 Rotary Machine - by Rick J - 01-27-2016, 12:07 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 01-27-2016, 07:16 AM
RE: Cimex vs 175 Rotary Machine - by GroovyJon - 01-28-2016, 10:13 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 01-29-2016, 01:42 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 03-05-2016, 08:07 PM
RE: Cimex vs 175 Rotary Machine - by encapman - 03-05-2016, 11:40 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 03-16-2016, 03:36 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 03-16-2016, 07:13 AM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 03-16-2016, 09:04 PM
RE: Cimex vs 175 Rotary Machine - by encapman - 03-16-2016, 09:42 PM
RE: Cimex vs 175 Rotary Machine - by encapman - 03-17-2016, 05:13 PM
RE: Cimex vs 175 Rotary Machine - by encapman - 10-01-2016, 11:53 PM
RE: Cimex vs 175 Rotary Machine - by GroovyJon - 03-22-2016, 11:59 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 03-23-2016, 03:50 PM
RE: Cimex vs 175 Rotary Machine - by FloorCareMD - 03-29-2016, 12:29 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 04-10-2016, 06:56 PM
RE: Cimex vs 175 Rotary Machine - by encapman - 04-10-2016, 09:51 PM
RE: Cimex vs 175 Rotary Machine - by FloorCareMD - 03-29-2016, 03:07 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 10-01-2016, 12:52 AM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 10-02-2016, 02:30 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 10-02-2016, 07:28 AM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 10-04-2016, 06:13 PM
RE: Cimex vs 175 Rotary Machine - by encapman - 10-04-2016, 07:58 PM
RE: Cimex vs 175 Rotary Machine - by richgallina - 10-11-2016, 12:32 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 10-22-2016, 04:49 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 10-22-2016, 06:41 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 11-04-2016, 01:18 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 11-04-2016, 05:32 PM
RE: Cimex vs 175 Rotary Machine - by Charles - 11-05-2016, 02:00 PM
AW: RE: Cimex vs 175 Rotary Machine - by Bernd - 11-05-2016, 05:19 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 11-09-2016, 09:14 PM
RE: Cimex vs 175 Rotary Machine - by Charles - 11-10-2016, 09:37 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 11-10-2016, 02:27 PM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 11-18-2016, 02:16 AM
RE: Cimex vs 175 Rotary Machine - by encapman - 11-18-2016, 07:23 AM
RE: Cimex vs 175 Rotary Machine - by Gero43 - 12-12-2016, 02:10 PM
RE: Cimex vs 175 Rotary Machine - by encapman - 12-12-2016, 11:50 PM



Users browsing this thread: 12 Guest(s)