09-16-2016, 05:24 PM
Hi Bernd,
I did convert my Orbot to a one jet sprayer. It requires you to go slower but it works for me.
My system is time consuming but I get very good results and I charge more than most.
I vacuum first with a Certified Pile Brush followed by using a 175 floor machine with a Gray pad to scrub.
Final step is Orbot with a blue Microbeast pad. Then have customer vacuum when dry.
Each step extracts dirt for a total of 4.
If all you have is an Orbot in a heavy soiled carpet I would slow down and do more scrubbing.
Then use cotton / SuperZorb type bonnets to help remove soil load followed by blue microbeast bonnet.
Should only have to do that in the really bad areas!
I did convert my Orbot to a one jet sprayer. It requires you to go slower but it works for me.
My system is time consuming but I get very good results and I charge more than most.
I vacuum first with a Certified Pile Brush followed by using a 175 floor machine with a Gray pad to scrub.
Final step is Orbot with a blue Microbeast pad. Then have customer vacuum when dry.
Each step extracts dirt for a total of 4.
If all you have is an Orbot in a heavy soiled carpet I would slow down and do more scrubbing.
Then use cotton / SuperZorb type bonnets to help remove soil load followed by blue microbeast bonnet.
Should only have to do that in the really bad areas!