Hos Orbot - Spray System

[Bernd]

Hi Bernd,

I did convert my Orbot to a one jet sprayer. It requires you to go slower but it works for me.

My system is time consuming but I get very good results and I charge more than most.

I vacuum first with a Certified Pile Brush followed by using a 175 floor machine with a Gray pad to scrub.

Final step is Orbot with a blue Microbeast pad. Then have customer vacuum when dry.

Each step extracts dirt for a total of 4.

If all you have is an Orbot in a heavy soiled carpet I would slow down and do more scrubbing.

Then use cotton / SuperZorb type bonnets to help remove soil load followed by blue microbeast bonnet.

Should only have to do that in the really bad areas!

Thanks Lee for sharing your cleaning procedure.

I have a 175 floor machine, the Orbot, a Sebo vaccum and a CRB.

I try to find a way to raise up my hourly productivity. I have a new big commercial job of 15.000 sq/ fts. Never been cleaned with some traffic lanes and coffee spots. Totally empty office rooms and hallways.

Normally i scrub first with a tan floor pad, use then a microfiber pad with scrub stripes and finish on the bad areas with SuperZorbs.

You invest a lot of time in your cleaning steps and i think you get great results!