12-01-2016, 05:58 PM
Filtration lines can be very difficult.
If you wish to give it a try using VLM I would recommend using the strongest mix of Punch the bottle recommends.
I then use an edging brush followed by a microfiber towel.
Lots of dwell time is also recommended.
If that procedure does not work you may need to HWE with a special filtration line solution.
Some filtration lines may come a bit lighter but may never come out fully.
If you wish to give it a try using VLM I would recommend using the strongest mix of Punch the bottle recommends.
I then use an edging brush followed by a microfiber towel.
Lots of dwell time is also recommended.
If that procedure does not work you may need to HWE with a special filtration line solution.
Some filtration lines may come a bit lighter but may never come out fully.