12-19-2016, 07:19 AM
A fair amount of debris, fuzz, dust, hair can accumulate.
So it's a good idea to clean a CRB machine at the end of each day or job.
1) Remove the brushes.
2) Wipe out the underside of the machine with a rag.
3) Vacuum the brushes. Or you can use a stiff whisk broom to scrub junk from the brushes.
4) Reinstall the brushes. Store the machine on the tray.
5) Wipe off the top of the machine. Applying WD40 will keep the stainless looking nice.
A little daily maintenance will keep your machine clean and running smooth.
So it's a good idea to clean a CRB machine at the end of each day or job.
1) Remove the brushes.
2) Wipe out the underside of the machine with a rag.
3) Vacuum the brushes. Or you can use a stiff whisk broom to scrub junk from the brushes.
4) Reinstall the brushes. Store the machine on the tray.
5) Wipe off the top of the machine. Applying WD40 will keep the stainless looking nice.
A little daily maintenance will keep your machine clean and running smooth.