03-30-2018, 01:55 PM
Barry, sounds like you have a good routine for wiping down your Brushencap CRB machine. That could be part of the reason you have had no maintenance issues in 2.5 years!
You could take off the gear box side housing and inspect and lightly lube the gears from time to time, but doing a daily removal/cleaning of brushes and axles and wiping down the outside and inner trays each day with Wd-40 or light lube is the real key to keeping it in good condition.
![[Image: IMG_0400.jpg]](https://s7.postimg.org/5m297ngzr/IMG_0400.jpg)
![[Image: IMG_0402.jpg]](https://s7.postimg.org/6lsk2z6br/IMG_0402.jpg)
Keep it up and you will avoid what I found doing a recent customer repair...
NOW THAT IS NEGLECT!
You could take off the gear box side housing and inspect and lightly lube the gears from time to time, but doing a daily removal/cleaning of brushes and axles and wiping down the outside and inner trays each day with Wd-40 or light lube is the real key to keeping it in good condition.
Keep it up and you will avoid what I found doing a recent customer repair...
NOW THAT IS NEGLECT!
Rod Clarkin
Excellent Supply 727-821-2020
Excellent Supply 727-821-2020