03-08-2013, 07:20 PM
(03-08-2013, 05:59 PM)FloorCareMD Wrote: Leofry,
Maybe Rick's "Scrub3" would be something you would be interested in...
The Scrub3 has been tabled for now. We weren't satisfied with its performance. We won't sell something with our name on it if is't right. So at least until we can get it sorted out, the Scrub3 is on hold. Sorry.
To answer the question above, comparing a Cimex to a rotary... The Cimex is no comparison to a rotary. No comparison at all! A single disk 175 rotary has one driver turning at 175 rpm's. The Cimex has 3 drivers spinning at 400 rpm's. That's 3 times as many drivers spinning more than twice as fast. That alone would lead us to over a 6 times increase in efficiency with each cleaning pass. Added to that, the 3 drivers are spinning clockwise while the drive-deck "bowl" is turning counterclockwise - so the carpet's being scrubbed left and right at the same time. So between the 6 times increase and the fact that we're safely scrubbing the fiber from all sides at the same time we're able to provide superior agitation to the carpet. Plus there's no side to side torque like with a rotary. And there's a 6.6 gallon tank so you can cover some ground. All this leads to an unmatched machine for commercial carpet scrubbing.