04-29-2013, 03:13 PM
A word of caution.
SOME Encap; & other solutions & products can build up in the spray jet when drying.
Poking a piece of wire into the orifice can also damage the very fine opening, thus allowing more solution to come out, and in a not so uniform pattern.
Probably not a great worry with the way the pads/bonnets disperse the product on the floor.
BUT, just something to be aware of.
SOME Encap; & other solutions & products can build up in the spray jet when drying.
Poking a piece of wire into the orifice can also damage the very fine opening, thus allowing more solution to come out, and in a not so uniform pattern.
Probably not a great worry with the way the pads/bonnets disperse the product on the floor.
BUT, just something to be aware of.