05-23-2013, 11:51 AM
It will pull a little to the right. This is the nature of ALL of the OP machines that have a free floating handle and wheels off the ground. But here are a few things to practice to make running the machine easier. Make sure that your bonnets are wet before you use them. Spray down sufficient detergent to get the fiber damp. And run the machine by pushing it straight forward and backward as much as possible, rather than side to side. Run it like you see Brian running it in the video that we shot - straight forward and backward. And if you're still fighting it, you might try using Tuway Thin One bonnets which have less drag on the carpet than the thicker MicroBeast bonnets.