07-19-2013, 03:52 PM
I have found that most sticky stuff - adhesives, gum, wax, tar, etc. can most easily be removed with a simple 2 part approach.
1. Freeze the sticky stuff using a freeze spray. Freeze the spot and gently chip the bulk of the frozen residue from the fiber. (We have an excellent gum freeze spray in the Releasit line) http://www.excellent-supply.com/Releasit..._p_62.html
2. Apply a small dab of solvent gel. CTI Pro Solve Gel works great for this. Rub the spot gently with a towel, blotting up the gel and any remaining residue from the fiber. http://www.excellent-supply.com/CTI-Pros..._p_52.html. Then just encap like normal.
In my years in our commercial cleaning business we've cleaned TONS of gum in this manner. My craziest moment using this method was in a Disney Store. They had a cool structural ceiling in the store which was completely exposed and open to the under side of the roof. Well the store had some roofers working up on the roof and somehow they managed to drip hot tar through the roof and it landed on the carpet. (Incredibly it didn't melt the nylon fiber.) When I arrived there was a hard layer of tar about 8" wide. First I under-promised! Then I took plenty of time freezing and chipping. After the majority of the tar had been removed from the surface, I then used a solvent gel to remove the remaining tar stain from the fiber - dabbing and blotting, dabbing and blotting, dabbing and blotting. The spot took about an hour of slow and careful work. But it all came out. After removing the tar, I then encapped the carpet like normal. I'm not kidding - it turned out perfect!
1. Freeze the sticky stuff using a freeze spray. Freeze the spot and gently chip the bulk of the frozen residue from the fiber. (We have an excellent gum freeze spray in the Releasit line) http://www.excellent-supply.com/Releasit..._p_62.html
2. Apply a small dab of solvent gel. CTI Pro Solve Gel works great for this. Rub the spot gently with a towel, blotting up the gel and any remaining residue from the fiber. http://www.excellent-supply.com/CTI-Pros..._p_52.html. Then just encap like normal.
In my years in our commercial cleaning business we've cleaned TONS of gum in this manner. My craziest moment using this method was in a Disney Store. They had a cool structural ceiling in the store which was completely exposed and open to the under side of the roof. Well the store had some roofers working up on the roof and somehow they managed to drip hot tar through the roof and it landed on the carpet. (Incredibly it didn't melt the nylon fiber.) When I arrived there was a hard layer of tar about 8" wide. First I under-promised! Then I took plenty of time freezing and chipping. After the majority of the tar had been removed from the surface, I then used a solvent gel to remove the remaining tar stain from the fiber - dabbing and blotting, dabbing and blotting, dabbing and blotting. The spot took about an hour of slow and careful work. But it all came out. After removing the tar, I then encapped the carpet like normal. I'm not kidding - it turned out perfect!