• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
What has happened?
#19
(10-12-2012, 07:34 PM)Charles Wrote: JAMIE:

You can always check out the old board. Just google it. You will see it. There are a lot of guests
that come here and a lot of views and I think sometimes they are afraid to post something. All of you guys out there who buy equipment and chemicals should be able to say something once in awhile. This board is ok. No need to change.

Here is the old board if you want to search older topics:
http://www.network54.com/Forum/228309/

EDIT: Sorry Rick posted this before I saw your post, my original post is below.

Thanks Charles

I know I made a very long post but I did mention somewhere amongst all that I do use the old board, it's bookmarked on my browser. But thanks for letting me know, it's appreciated.

I think the question still remains. Why has the board slowed down?

I suppose Rick could decide not to change anything and see if it's just a phase, I personally would totally understand that and respect that decision (not that he needs that from me, cause in the spectrum of everything I'm just one guy, but I do care about it).

At the end of the day the EncapBoard is a marketing tool for Rick whilst at the same time being a fantastic resource for us all. If any other part of his marketing was slowing down, I'm ***** sure he would want to know why? And he would want to do something about it. The benefit for him in this case is that he has the opinions of many to mull over on how to get it working at it's best. Not too many other marketing tools really gives you that. I gave some ideas and would not be offended if none of them were implemented, no problem.

But I'm sure we all know that to do the same thing and expect a different result is a frustrating process to say the least.

Anyhow, worst case scenario I wasted 5 minutes of your time reading my Blurb. I'm certainly not trying to be controversial.

Cheers as always

Jamie
  Reply


Messages In This Thread
What has happened? - by jtmellon - 10-06-2012, 11:12 PM
RE: What has happened? - by NJP - 10-07-2012, 07:27 AM
RE: What has happened? - by Ades Gros - 10-07-2012, 08:30 PM
RE: What has happened? - by encapman - 10-08-2012, 06:30 AM
RE: What has happened? - by Cairnswun - 10-08-2012, 06:51 AM
RE: What has happened? - by NJP - 10-08-2012, 06:57 AM
RE: What has happened? - by Cairnswun - 10-08-2012, 05:34 PM
RE: What has happened? - by David Edwards - 10-08-2012, 09:37 PM
RE: What has happened? - by jtmellon - 10-08-2012, 10:44 PM
RE: What has happened? - by encapman - 10-09-2012, 06:32 AM
RE: What has happened? - by jtmellon - 10-10-2012, 12:19 AM
RE: What has happened? - by prodrying - 10-12-2012, 01:08 PM
RE: What has happened? - by encapman - 10-12-2012, 04:29 PM
RE: What has happened? - by jtmellon - 10-12-2012, 06:39 PM
RE: What has happened? - by Jamie - 10-12-2012, 06:59 PM
RE: What has happened? - by encaped - 10-12-2012, 07:09 PM
RE: What has happened? - by Charles - 10-12-2012, 07:34 PM
RE: What has happened? - by Jamie - 10-12-2012, 10:42 PM
RE: What has happened? - by encapman - 10-12-2012, 10:14 PM
RE: What has happened? - by Cairnswun - 10-13-2012, 12:19 AM
RE: What has happened? - by Pete - 10-13-2012, 09:48 AM
RE: What has happened? - by Cairnswun - 10-13-2012, 10:12 AM
RE: What has happened? - by Jeffrey - 10-14-2012, 08:27 AM



Users browsing this thread: 7 Guest(s)