11-01-2013, 04:05 PM
1. VACUUM VACUUM VACUUM. Make multiple SLOW passes with your vacuum north-south / east-west.
2. Pre-scrub with the Cimex.
3. Rinse the daylights out of it with HWE.
4. Put down blowers to get it to speed dry.
5. Once it's dry or at least 99% dry, encap it with your Cimex.
For that final encap step I would mix Encap-Clean DS2 at 6 oz per gallon. Keep the solution to a minimum (keep it as dry as possible). Put down blowers following the encap step.
This should get the heavy load of crud in the carpet under control.
2. Pre-scrub with the Cimex.
3. Rinse the daylights out of it with HWE.
4. Put down blowers to get it to speed dry.
5. Once it's dry or at least 99% dry, encap it with your Cimex.
For that final encap step I would mix Encap-Clean DS2 at 6 oz per gallon. Keep the solution to a minimum (keep it as dry as possible). Put down blowers following the encap step.
This should get the heavy load of crud in the carpet under control.