12-02-2013, 11:53 AM
(This post was last modified: 12-02-2013, 11:54 AM by bonedrycarpet.)
Thanks for the help. I did one wet with the handle held down the whole time till the end of the cord (No extension cord used btw), then I turned it around and did a dry pass over the area I just went over wet. After that I moved over and overlapped about 3 inches and repeated.
Dry it looked about 50 percent better, but the lines were still quite visible. I vacuumed 2 times and it helped me achieve a lightening of the lines, but still there and obvious.
At the base of the pic I went over it with extra wet passes-I held the lever to release liquid at a rate of about double or triple of what I did on the other area. Lots of foam.
Thanks for the help
Will start using the fiber plus pads on different hallway and see what happens. The motor bogs a lot with those though.
Dry it looked about 50 percent better, but the lines were still quite visible. I vacuumed 2 times and it helped me achieve a lightening of the lines, but still there and obvious.
At the base of the pic I went over it with extra wet passes-I held the lever to release liquid at a rate of about double or triple of what I did on the other area. Lots of foam.
Thanks for the help
Will start using the fiber plus pads on different hallway and see what happens. The motor bogs a lot with those though.