Dirt Dragon for cleaning wood floors

[Hoss]

With the Orbot, you have the ability to provide high quality floor refinishing as an intermediate step between simply cleaning and having to sand and completely refinish the floor.

Steps: 1. Vacuum 2. clean with a pad and a neutral cleaner such as the Bona brand. 3. Scrub and scuff the polyurethane finish using a neutral cleaner and a slightly abrasive pad such as the Grey FiberMax 4. Scrub and scuff the edges with a doodlebug 5. Clean off all of the cleaning solution and allow to dry 5. Mask off the perimeter. 6. Apply a new finish to bond to the scuffed poly such as the Bona Floor Polish - think thin coat with a microfiber mop head 7. Allow to dry and see if you need a second coat.

I advise that you first try this process on a floor you own for practice and to get a sense of the results. This much less disruptive and less toxic to the homeowner's environment than the formal sanding and refinishing process ~ and the results can be just as good.