12-20-2013, 10:03 PM
(12-20-2013, 05:57 PM)Shorty Wrote: This is merely a suggestion following on from the previous post.
Prior to applying the sealer/finish & the floor is dry, first buff the floor with a red pad.
The friction will help to seal the open pores and it will also put a better shine on the finished product.
Because the open pores have been sealed, you will use less sealer/finish.
Short 1
Words of wisdom!
I haven't really done wood floor care. But I've stripped and recoated plenty of VCT. And the same idea applies... buff/burnish the bare floor after stripping and you'll use less finish and get a better shine. So what Shorty is saying for wood floors makes a lot of sense - although I wouldn't have thought of it. Thanks for sharing that Shorty!