02-04-2014, 10:51 PM
I don't mean spots either, but room length over sprays coming out 2-3inches from the baseboards.
This is apartment work so of course they expect miracles, but there's no initial budget from the mass application of a PIG type chem--and put on in such amounts, I'd worry about delamination anyway.
It's not cured out yet, only 2days old, but it is dark color. I'm thinking just attack with grey fiber plus followed by textile pads on the hand buffer, set at high rpms and fiber damage be hanged.
Would Punch be the best bet to loosen it up a bit?
Interesting experiment--some of you may know I tout vapor steamers quite a bit--I'm going to see if it's useful.
Advice please!
This is apartment work so of course they expect miracles, but there's no initial budget from the mass application of a PIG type chem--and put on in such amounts, I'd worry about delamination anyway.
It's not cured out yet, only 2days old, but it is dark color. I'm thinking just attack with grey fiber plus followed by textile pads on the hand buffer, set at high rpms and fiber damage be hanged.
Would Punch be the best bet to loosen it up a bit?
Interesting experiment--some of you may know I tout vapor steamers quite a bit--I'm going to see if it's useful.
Advice please!