![]() |
|
confused.... - Printable Version +- Encapsulation carpet cleaning and commercial carpet care forum by Excellent-Supply.com & Releasit (https://forum.excellent-supply.com) +-- Forum: Forum Home (https://forum.excellent-supply.com/forumdisplay.php?fid=1) +--- Forum: GENERAL DISCUSSION (https://forum.excellent-supply.com/forumdisplay.php?fid=2) +--- Thread: confused.... (/showthread.php?tid=580) Pages:
1
2
|
confused.... - MikeB - 07-06-2013 I have had some people express how much the perfect vac lines impress them. Then again some say nothing. In my mind nice uniform vac lines looks "clean" and coveys a sense of a job well done to most people. It's just a perception issue. Whether its done with a vac or a grandi groom makes little difference. And yes it does make a vac stink! RE: confused.... - TheCleaningDude - 07-07-2013 Are you using a Recoil or Jag? How are you powering it? Geni or customer power? (07-05-2013, 01:39 PM)David-Hebert Wrote: We run portables doing residential either a Steamin Demon When I first started I used a Mytee M12 portable. Good machine, but you had to use a short hose run and the machine was heavy....heavy! I think it weighs around 130#'s? Anyway, I eventually settled on the Orbot and have had great results for the last year or so. Frieze is a bit of a tough one to start with. The other guys have given you some great advice. All I can add to it is that from my experience frieze requires a 'dual' cleaning. Pre spray, pad and repeat. This if it's a dirty frieze. Otherwise, you're good to go. (07-05-2013, 11:10 AM)fantastic floors Wrote: Ok i am confused - who is cleaning residential carpets with VLM rather than HWE? (07-06-2013, 07:28 PM)MikeB Wrote: I have had some people express how much the perfect vac lines impress them. Then again some say nothing. RE: confused.... - fantastic floors - 07-07-2013 Yeah the frieze carpet is in pretty good shape not bad at all so I should be ok. Actually I am worried that because the carpets in good shape my cleaning g won't be that noticable. Thanks everyone for the feedback - appreciate it. RE: confused.... - MikeHabib - 07-08-2013 I just did a job the other day. I used my 175 with a Dirt Napper Brush first, then went back over it with a Bonnet pad.It came out great. On the stairs , I used a mini buffer and was not happy with the results at all. I normally use my Oreck Orbitor however, I am getting ready to purchase a Cyclo. confused.... - encapman - 07-09-2013 A $43 alternative to the Cyclo... http://www.excellent-supply.com/8-inch-Drill-Driver-Carpet-Cleaning-Accessory_p_10.html Rick Gelinas The Encapman |