• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NEW Adsorb Ultra
#1
New Product!
We now have Adsorb Ultra dry cleaning powder for the BrushEncap machines.. Whereas our original Adsorb dry powder compound worked well, new Adsorb Ultra is even better. Have a look...  Adsorb Ultra

[Image: adsorb_ultra.jpg]
  Reply
#2
About how many sq ft can the 20lb do? on light to med soil level. Will it work on berber carpet?
  Reply
#3
Here are conservative averages for cleaning with Adsorb Ultra on various soil conditions.

Light Soil: 80 Sq. Ft. per Lb. ~ or 1,600 sq ft per 20 LB container.
Medium Soil: 50 Sq. Ft. per Lb. ~ or 1,000 sq ft per 20 LB container.
Heavy Soil: 25 Sq. Ft. per Lb. ~ or 500 sq ft per 20 LB container.

And yes, it will work great on Berber.
  Reply
#4
What would be the most efficient and thorough process to spread the compound? By the way, I did recently purchase a 20" Brush-N-Cap machine. Mostly using it to pre-scrub before HWE. Loving it!!
Floor Care Specialist
Green Bay, WI

http://www.newsolidsurfacecleaning.com
  Reply
#5
This is how I spread it. I spread my feet and place a hand full at the end of my shoes then repeat at 90degrees making a square. Then I place a handful in the middle of the square. Imagine a dice with the number 5 showing. Don't apply near edges. It spreads out much further than the original dice pattern. This product is really good at soil removal if used correctly.
  Reply
#6
I normally just toss powdered compounds by the handful. I go heavier in the center of the traffic areas, and lighter toward the perimeter. I'll normally do between 50 sq ft to 100 sq ft sections at a time.
  Reply




Users browsing this thread: 1 Guest(s)