First Cimex problem

[Lounge Lizards]

For some strange reason, my original Big Yella has started splashing solution around.

As I go down the carpet, I can see splash marks outside the perimeter of the cleaning path on the dry carpet.

If I work alongside a wall, it splashes up the wall about 2 inches.

WHY ?????

How do I fix it ????

RODNEYYYYYYY

Thank you all.

[encapman]

Sounds like your plumbing is getting plugged up. I know, I know, you clean it on a regular basis. Regardless of that, when it starts to fling solution, it's an indication that the head is at least partially plugged. Give it a vigorous cleaning to try to dislodge the mineral build-up and other crud that forms inside the head of the machine. 

Follow these instructions...
http://excellent-supply.com/CIMEX_FLOW_M...CTIONS.pdf


P.S. And make sure that you NEVER NEVER NEVER use anything besides Releasit in your Cimex.  

[Lounge Lizards]

Using Releasit will Release the problem??

Ta Rick, hopefully get to it this arvo, otherwise the new machine goes in the van.

Aha, just realized, I have to go & do a report tomorrow up in Herberton, (up over the hill).

It's only about 60 miles, but takes two hours to get there.

http://www.historicvillageherberton.com.au/

We'll make a day of it, up there, do a report, drive back to Atherton for lunch, then a nice drive back down the Gillies Range.

Top of the Gillies is where I busted me leg when I fell off me stationary Suzuki Virago 1100, 19 years ago last month.

https://www.youtube.com/watch?feature=player_detailpage&v=6YAXpkc6eVI

That's it, thanks again, gotta get to work.

[Lounge Lizards]

Worked out what happened.

When I got my 2nd Cimex, Old Original went in the shed.

Had a solution line problem with the new one, so just swapped machines.

OO had been sitting idle for some time, hence the build up.

Simple fix. ?

[encapman]

Yes, it's a simple fix. Just follow the instructions in the PDF. You may have to repeat the process a couple of times in succession to get it fully cleared and flowing freely again.

http://excellent-supply.com/CIMEX_FLOW_M...CTIONS.pdf