i will check F.C., thanx!
i know this is something i SHOULD be able to fix on my own, if only i was even slightly mechanically inclined. and when i realize what i should have done it will be one of those DUHHH moments lol.
i looked more closely at the pulled wire and inside the box the white plastic is frayed exposing the copper wire. i will have to unscrew that "box" cover and wrap that with electrical tape and tighten the inner ring...w/e that is called...then tighten down the outer aluminum bracket thingy, into the top of that box where the wire goes.
basically the bottom of the Sprayborg comes crashing down if i put the handle all the way forward. if i put the handle back one notch, then i can't lift the head totally upright or else the bottom of the pump will crush the wire coming out of the top of that box.
i spoke with Rod today and he is looking into a fix for it tomorrow. i'll post updates on how it gets fixed since other's have the same 2008 model and might need to know for future reference.
i was about to turn the water pump 180 degrees but now i am wondering, maybe it is supposed to work in that position? i mean look at the 2nd pic, maybe those 2 hoses that exit/enter the water pump on the lower end of it, are supposed to exit/enter it on the bottom because of gravity??
i know this is something i SHOULD be able to fix on my own, if only i was even slightly mechanically inclined. and when i realize what i should have done it will be one of those DUHHH moments lol.
i looked more closely at the pulled wire and inside the box the white plastic is frayed exposing the copper wire. i will have to unscrew that "box" cover and wrap that with electrical tape and tighten the inner ring...w/e that is called...then tighten down the outer aluminum bracket thingy, into the top of that box where the wire goes.
basically the bottom of the Sprayborg comes crashing down if i put the handle all the way forward. if i put the handle back one notch, then i can't lift the head totally upright or else the bottom of the pump will crush the wire coming out of the top of that box.
i spoke with Rod today and he is looking into a fix for it tomorrow. i'll post updates on how it gets fixed since other's have the same 2008 model and might need to know for future reference.
i was about to turn the water pump 180 degrees but now i am wondering, maybe it is supposed to work in that position? i mean look at the 2nd pic, maybe those 2 hoses that exit/enter the water pump on the lower end of it, are supposed to exit/enter it on the bottom because of gravity??