07-30-2013, 10:57 AM
Quality difference? Not necessarily. You can get good results with a 175 rotary. It just takes more time.
By comparison, a Cimex runs at 400 rpm. The Cimex has 3 times as many heads spinning more than twice as fast. So you're actually working with more than 6 times as much scrubbing power per pass. Added to that it's a planetary scrubber so as the drive deck turns clockwise, the drivers are spinning counter-clockwise. Bottom line: the Cimex will greatly improve your efficiency. You can scrub at a rate of 2K - 3K per hour with far less effort. And at the end of the day time is money.
But you can get by with a rotary if you have to.
Rick Gelinas
The Encapman
1-800-330-1888
By comparison, a Cimex runs at 400 rpm. The Cimex has 3 times as many heads spinning more than twice as fast. So you're actually working with more than 6 times as much scrubbing power per pass. Added to that it's a planetary scrubber so as the drive deck turns clockwise, the drivers are spinning counter-clockwise. Bottom line: the Cimex will greatly improve your efficiency. You can scrub at a rate of 2K - 3K per hour with far less effort. And at the end of the day time is money.
But you can get by with a rotary if you have to.
Rick Gelinas
The Encapman
1-800-330-1888